Offering a supremely small and budget-friendly solution for getting audio
from vinyl records or line-level sources into your computer, headphones, and
speakers, the Behringer UFO202 packs a surprising set of I/O and features into
an ultracompact, bus-powered 2x2 USB audio 1.1 interface that fits in your
pocket and needs no drivers and no special configuration.
Its unbalanced stereo analog input (on RCA jacks) features a line/phono
switch, allowing it to accept line-level signal from sources such as a DJ mixer,
cassette deck, or mixing console, or (in phono mode) the outputs of a turntable.
The built-in phono preamp ensures proper amplification of the low-level outputs
from record players without requiring a separate device.
The UFO202 has more outputs than you would expect on a such a miniscule
box—a stereo RCA output for running a feed to a speaker system and a 3.5mm
headphone output with a volume control for convenient personal monitoring of the
input signal.
With internal 16-bit / 48 kHz AD/DA converters and a USB Type-A connector
on an attached cable, the UFO202 plugs directly into your Mac/Windows computer
for quality recording or streaming. It comes with a bundle of audio
recording/editing/restoration software, effects plug-ins, and virtual
instruments, so you can have fun and be productive without having to buy a slew
of programs.
Transfer Records and Tapes
Connect outputs from a turntable, cassette player, DJ mixer, or mixing
console to your computer for simple, cost-effective digitization of your
precious records or mixes.
Stereo Line/Phono Inputs
Thanks to the line/phono switch and the presence of a built-in phono
preamp, the RCA input jacks on the UFO202 are ideal for accepting the outputs of
a record player or for receiving unbalanced line-level signal from analog
mixers, DJ decks, and more.
Ground Terminal
Some record players have a separate ground cable. If so, attach the cable
to the UFO202's ground terminal to avoid excessive noise and hum.
Multiple Outputs
With a stereo RCA output and a level-adjustable 3.5mm stereo headphone
output, the UFO202 can simultaneously accommodate headphones and a speaker
system while the USB connection carries digital audio to and from your
computer.
Simple Operation
Since the UFO202 is bus powered via USB, it requires no batteries or
external power supply. Also, it works without having to download and install
drivers, so you can just plug it in and start using it.
Includes Software
To enhance your audio experience, the UFO202 comes with audio
recording/editing/restoration software, effects plug-ins, and virtual
instruments. Record live audio, convert tapes and records into digital
recordings, edit sound files, apply noise-reduction, mix sounds together, change
the speed or pitch of a recording, and much more.
Specs
Form Factor Tabletop
Display None
Channels of I/O 2 Inputs / 2 Outputs at 48 kHz
Max Sample Rate/Resolution 48 kHz / 16-Bit
Number of Mic Preamps None
Solo/Mute None
Pad None
High-Pass Filter None
Expansion Slots None
Connectivity
Analog Audio I/O 1 x Stereo RCA Coaxial Unbalanced Line/Phono
Input
1 x Stereo RCA Coaxial Unbalanced Line Output
1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output
Phantom Power None
Digital Audio I/O None
Host Connection / USB 1 x USB Type-A (Class-Compliant USB 1.1)
USB (Non-Host) None
Sync I/O None
Network I/O None
MIDI I/O None
Wireless Connectivity None
Memory Card Slot None
Performance
Frequency Response System:
10 Hz to 20 kHz ±1 dB (at 44.1 kHz)
10 Hz to 22 kHz ±1 dB (at 48 kHz)
Max Input Level 2 dBV
Max Output Level Line Outputs:
2 dBV
Headphone Outputs:
-2 dBu
Headphone Output Power 3.7 mW per Channel into 100 Ohms
Impedance Line Inputs:
27 Kilohms
Line Outputs:
400 Ohms
Headphone Outputs:
50 Ohms
SNR A/D Converters:
89 dB (A-Weighted, 1 kHz)
D/A Converters:
96 dB (A-Weighted, 1 kHz)
THD 0.05% (1 kHz)
Crosstalk -77 dB (1 kHz)
Digital Audio
Sample Rates 32 / 44.1 / 48 kHz
Sample Rate Conversion None
Bit Depths 16-Bit
Sync Sources Internal
Compatibility
OS Compatibility macOS 9.0.4 or Later
macOS 10 or Later
Windows 2000
Windows XP
Included Software None
Supported Drivers/API & Plug-Ins macOS Class-Compliant (No Driver
Needed)
Windows Class-Compliant (No Driver Needed)
Processor Requirement Mac:
300 MHz PowerPC G3
PC:
400 MHz Intel
RAM Requirements 128 MB
Mobile Device Compatibility None
Required Hardware Available USB 1.1 Port
Internet Connection Required for Registration, Software/Driver
Download
Power
Power Requirements USB Bus Power
Current Consumption 100 mA
Physical
Dimensions 3.46 x 2.36 x 0.87" / 8.79 x 5.99 x 2.21 cm
Weight 3.5 oz / 100.0 g
Packaging Info
Package Weight 0.53 lb
Box Dimensions (LxWxH) 7.35 x 5.6 x 1.45"