For more information please visit
https://www.cisco.com/c/en/us/td/docs/wireless/antenna/installation/guide/5135dw.pdf
Cisco Original
Technical Specifications
Antenna type Dipole
Operating frequency range 5150 – 5850 MHz
Nominal input impedance 50 Ohms
2:1 VSWR bandwidth 5150 – 5850 MHz
Gain 3.5 dBi
Polarization Linear, vertical
E-plane 3-dB beamwidth 40 degrees
H-plane 3-dB beamwidth Omnidirectional
Connector type RP-TNC plug
Length 5.3 in. (13.4 cm)
Radome length 3.4 in. (8.6 cm)
Width 0.62 in. (1.5 cm)
Operating temperature –22°F – 158°F
(–30°C – 70°C)
Storage temperature –40°F – 185°F
(–40°C – 85°C)
Environment Indoor, office
Antenna type Dipole
Operating frequency range 5150 – 5850 MHz
Nominal input impedance 50 Ohms
2:1 VSWR bandwidth 5150 – 5850 MHz
Gain 3.5 dBi
Polarization Linear, vertical
E-plane 3-dB beamwidth 40 degrees
H-plane 3-dB beamwidth Omnidirectional
Connector type RP-TNC plug
Length 5.3 in. (13.4 cm)
Radome length 3.4 in. (8.6 cm)
Width 0.62 in. (1.5 cm)
Operating temperature –22°F – 158°F
(–30°C – 70°C)
Storage temperature –40°F – 185°F
(–40°C – 85°C)
Environment Indoor, office
System Requirements
This antenna is designed for use with Cisco Aironet access points and bridges but can be used with any
5-GHz Cisco Aironet radio device that uses RP-TNC connectors.
Features
The antenna has an articulated base that can be rotated 360 degrees at the connection point and from 0
to 90 degrees at its knuckle with detents at 45 and 90 degrees. The articulated base is shown in the
following illustration.
This antenna is designed for use with Cisco Aironet access points and bridges but can be used with any
5-GHz Cisco Aironet radio device that uses RP-TNC connectors.
Features
The antenna has an articulated base that can be rotated 360 degrees at the connection point and from 0
to 90 degrees at its knuckle with detents at 45 and 90 degrees. The articulated base is shown in the
following illustration.
