This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick…) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up -Loading &Down-Loading. Extension of file name supports: *.?NC, *.TXT,*.NC, *tap
NOTICE. This is the version without WIFI connection function.
If you are interested in the "WIFI CONNECTION" function, you can access our store

· 04 magnet nuts to mount on CNC machine

· 06 buttons: RESET, FUNCTION, BACK, SET, UP, DOWN

· Function: COPY-PASTE, CUT-PASTE, RENAME, DELETE, Make NEW FOLDER: easy management files & folders on USB flash drive  and internal MEMORY.

· Function AUTO CUTTING: it can cut by Percent or Line Number. We can see program content after cutting.

· Function SEND – Send program to CNC machine, monitoring program content when sending

· Function FORCED SEND – Forced transfer a program to CNC machines without the required signal from CNC machines (Skip XON)

· Function RECEIVE – Receive program / parameters from CNC machine.

· USB/MEMORY capacity monitoring; Format USB flash drive, etc.

Replace PC running a DNC software
PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER
  • Data transfer to CNC machine, from USB to RS232, USB to 50 pin parallel port.
  • Can transfer from USB or memory. Memory up to 2G, 4G...
  • Transfer data to CNC machine with TAPE MODE or MEMORY MODE
  • LCD 2.4 inch, 65536 colors
Features: COPY-PASTE, CUT-PASTE, RENAME, NEW FOLDER, DELETE, AUTO CUTTING...
Baud rate max 115200
Shipping: International shipping. We will ship with and track no