This is a portable program transfer device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick...) to or from the CNC control through the RS232 communication port, also referred to as Drip feed DNC or Up -Load and download. File name extension supports: *.?NC, *.TXT,*.NC, *press

· 04 magnetic nuts for mounting on CNC machine

· 06 Buttons: RESET, FUNCTION, BACK, SET, UP, DOWN

· Function: COPY-PASTE, CUT-PASTE, RENAME, DELETE, CREATE NEW FOLDER: Easy file and folder management on USB flash drive and internal memory.

· AUTOMATIC CUTTING Function: Can cut by percentage or row number. We can see the contents of the program after cutting.

· SEND function - Sends the program to the CNC machine, monitoring the content of the program as it sends

· FORCED SEND function - Forced transfer of a program to CNC machines without the signal required by CNC machines (Jump XON)

· RECEIVE function - Receives program/parameter from CNC machine.

· Monitoring USB/MEMORY capacity; Format USB flash drive, etc.

Replace the PC running DNC software
PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER
  • Data transfer to CNC machine, from USB to RS232, from USB to 50-pin parallel port.
  • It can transfer from USB or memory. Memory up to 2G, 4G...
  • Transfer data to the CNC machine with TAPE MODE or MEMORY MODE
  • 2.4-inch LCD, 65536 colors
Features: COPY-PASTE, CUT-PASTE, RENAME, NEW FOLDER, DELETE, AUTO CUT...
600-115200 transmission speed