Application:  

For Subaru Crosstrek  2016-2017
For Subaru Forester 2008-2018
For Subaru Impreza 2008-2016
For Subaru Impreza R 2009-2012
For Subaru Impreza Sport 2008-2011
For Subaru Legacy 2008-2017 
For Subaru Outback 2008-2017
For Subaru Tribeca 2008-2014
For Subaru WRX 2015-2017
For Subaru WRX STI 2016
For Subaru XV Crosstrek 2013-2015

Reference Part Number : 

28103AJ00A,28103-AJ00A,28103AJ01A,28103SA001,28103SA002,

28103AG01A,28103AG01B,28103AG01C,28103SA000,28103SG000

Feature:

* 100% brand new 4 Pcs Tire Pressure Sensor.

* Made of high quality material, ensuring high durability for long time use.

* Professional manufacturing, high accuracy and reliability.

* High level of accuracy and sensitivity, enhance safety of your vehicle.

* Fit both the front wheels and the rear wheels, left and right sides.

* Please calibrate your Sensor after install

Package Include:  

4x Tire Pressure Sensors

Note:

* Tire pressure sensors maybe require programming or "re-learning" before they will become activated or recognized by the vehicle upon installation.

* Please check your owner's manual for details on this process specific to your vehicle.

* The sensors were not coming with any nuts or bolts.

* Please confirm your original part number or oem numbr can matche up with one of the part numbers above

* Professional installation is highly recommended (No Instruction Included) 

* For whatever we can help,please feel free to contact us via message. We are always here for you.

Installation Process:

1. Loosen the tire: Remove the valve cap and core and deflate the tire.

2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.

3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.

4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.

5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.