ENG-FUCHS LUBRITECH CEPLATTYN® KG 10 LC | DEALER
Highly Viscous Adhesive Lubricant | PROFESSIONAL USE ONLY
MADE IN GERMANY AND USA
THE ENG GROUP LLC (GENERAL OILS) IS THE FUCHS
DEALER DISTRIBUTOR | FLORIDA, USA
WE DISTRIBUTE THE ENTIRE LINE OF CEPLATTYN LUBRICANTS
Lubrication, Maintenance, Service
for Open Gears N| D0001790
THIS LISTING: CODE
65101801040, 1 DRUM, 190KG
CEPLATTYN KG
10 LC - 374 LB DRUM W/O LINER
Description
CEPLATTYN KG 10 LC is based on carefully selected, high-viscosity mineral and synthetic oils and contains an aluminium-complex-soap as thickener. Especially harmless, chlorine and heavy metal-free additives together with the finest and purest colloidal graphite offer extraordinarily high performance. CEPLATTYN KG 10 LC does not contain solvents. CEPLATTYN KG 10 LC together with CEPLATTYN RN and CEPLATTYN 300 represent the FUCHS LUBRITECH multi phase system.
Application
The high base-oil viscosity and thus good damping characteristics of CEPLATTYN KG 10 LC makes it suit- able for heavy shock load applications. The solid lu- bricants guarantee temperature-stability of the lube film above the normal temperature range. CEPLATTYN KG 10 LC is according to FALK specification for intermittend application. CEPLATTYN KG 10 LC can be applied via common lubricant spray systems. At temperatures below +5°C/+40°F additional heating system may have to be used for spraying. As CEPLATTYN KG 10 LC is highly economical for the lubrication of large open gears, consumption can be significantly reduced.
Open Gear Drives do the heaviest work in many branches of industry Open Gear drives are very common in the raw materials industry. The girth gear drives that are used in tube mills, coolers, washing drums, kilns, calciners and other machines have to transmit enormous torques‚ i.e. often up to 50,000 Nm. It is only natural that this kind of force subjects the gear wheels to very high stresses. Such gears are usually designed as spur or helical gears with modified involute profiles. The materials used for the gearing are usually CrNiMo tempered steel (pinion) and alloyed CrMo steel casting or cast iron (girth gear). The lubricant plays an important role The purpose of all design and tribotechnical efforts is to ensure, in spite of the enormous stresses, long-term, trouble-free operation. The primary cause of damaged gear wheels is not exclusively the problem of faulty adjustment of the drives and radial and axial run-out, but also the use of unsuitable lubricants, shortage of lubricant and its incorrect application. Therefore an optimum load-carrying capacity and smoothed gear teeth are to be achieved. An extremely precise alignment of the gears combined with the correct running-in procedures is essential. For the lubrication of Open Gears adhesive sprayable lubricants are most suitable. The best solution has a name: CEPLATTYN Wherever lubrication is required on highly stressed or pre-damaged gear drives, under arctic conditions or in hightemperature environments, FUCHS LUBRITECH can offer the right lubricant from the CEPLATTYN product range. CEPLATTYN adhesive lubricants are recommended by all leading manufacturers of gears and machines.
Advantages
Temperature range: +5 ºC / +120 ºC (+40 ºF / +280 ºF)
Excellent protection against wear
Good lube film stability at minimal consumption
Excellent adhesion
Good EP-properties
Reduces tribocorrosion
Water resistant