Application:
 

for Cadillac
For Escalade Base 2007-2011
For Escalade Hybrid 2009-2011
For Escalade Hybrid Platinum 2010-2011
For Escalade Platinum 2008-2011
For Escalade 2011 (submodel: Luxury, Premium)
For Escalade ESV Base 2007-2011
For Escalade ESV Platinum 2008-2011
For Escalade ESV 2011 (submodel: Luxury, Premium)
For Escalade EXT Base 2007-2011
For Escalade EXT 2011 (submodel: Luxury, Premium)

for Chevrolet
For Avalanche 2011 (submodel: LS, LT, LTZ)
For Silverado 1500 Hybrid 2009-2011
For Silverado 1500 LS 2008-2011
For Silverado 1500 XFE 2010-2011
For Silverado 1500 2007-2011 (submodel: LT, LTZ, WT)
For Silverado 2500 HD 2007-2011 (submodel: LT, LTZ, WT)
For Silverado 3500 HD 2007-2011 (submodel: LT, LTZ, WT)
For Suburban 1500 Z71 2007
For Suburban 1500 2007-2011 (submodel: LS, LT, LTZ)
For Suburban 2500 LTZ 2007
For Suburban 2500 2007-2011 (submodel: LS, LT)
For Tahoe Hybrid 2008-2011
For Tahoe 2007-2011 (submodel: LS, LT, LTZ)

for GMC
For Sierra 1500 Hybrid 2009-2011
For Sierra 1500 SL 2008-2011
For Sierra 1500 XFE 2010-2011
For Sierra 1500 2007-2011 (submodel: Denali, SLE, SLT, WT)
For Sierra 2500 HD Denali 2011
For Sierra 2500 HD 2007-2011 (submodel: SLE, SLT, WT)
For Sierra 3500 HD Denali 2011
For Sierra 3500 HD 2007-2011 (submodel: SLE, SLT, WT)
For Yukon Denali Hybrid 2010-2011
For Yukon Hybrid 2008-2011
For Yukon 2007-2011 (submodel: Denali, SLE, SLT)
For Yukon XL 1500 2007-2011 (submodel: Denali, SLE, SLT)
For Yukon XL 2500 2007-2011 (submodel: SLE, SLT)

Specification:
Accelerator Pedal Sensor for Cadillac Escalade Base 2007-2011
OEM No.: 
699-105
Notes: With pedal pad
Warranty:2 years warranty for any manufacture defect
Condition:Brand New
Quantity: 1 piece 
1. SYMPTOMS OF A FAULTY ACCELERATOR PEDAL SENSOR: SYMPTOMS
If the accelerator pedal sensor fails, the following fault symptoms may occur:
Increased engine idling speed
Vehicle does not respond if the accelerator pedal is pressed
Vehicle switches to "limp-home mode"
Engine warning light in the cockpit illuminates
2. ACCELERATOR PEDAL SENSOR FAULTY: CAUSE OF FAILURE
A failure could have a number of different causes:
Damaged cables or connections on the accelerator pedal sensor
Missing voltage and ground supply
Faulty electronic evaluation unit in the sensor
3. CHECKING THE ACCELERATOR PEDAL SENSOR: TROUBLESHOOTING
The following test steps should be considered during troubleshooting:
Read out fault code
Visual inspection of the accelerator pedal sensor to check for mechanical damage
Visual inspection of the relevant electrical connections and cables to ensure they are properly fitted and for any damage
Check of the sensor using an oscilloscope and multimeter

Note:
Notice:
-Instruction is not included. Professional installation is recommended
-Contact us please for whatever we can help