Description
  • Enviro-Safe Low Side Retrofitting with Cap - BRASS
  • Part#: 3012
  • Brass
  • New
  • Includes built-in valve core to save you the time of valve replacement during the conversion process and to ensure that the proper spec valve core is installed.
  • Finger tighten only! Do NOT use a wrench to tighten.
  • 1/4"
  • Standard R12 to 134a conversion fitting. All vehicles will use this fitting if converting from R12 to 134a.
  • Includes the blue cap as shown.
  • If refrigerant is escaping from fitting, the fitting is too tight. Raise up the fitting to stop the flow of refrigerant.